To pump manually, either when testing, or when you want to give the plants an extra dose, you have two options:
- Button on control unit.
- Device Control Panel via device WiFi.
Button on control unit
If it's a solar powered control unit, press the override button briefly once to wake it up. You'll hear a rising tone if it was asleep, and nothing if it's already awake.
Hold the "water/override" button down until you hear one beep, then let go. The system will pump zone 1 for 30 seconds. For Zone 2, wait until you hear two beeps, then let go.
Device Control Panel
If it's a solar powered control unit, press the override button briefly once to wake it up. You'll hear a rising tone if it was asleep, and nothing if it's already awake.
Connect to the Device Control Panel (click here to see how), and choose a manual watering time from the relevant zone screen.