The extension module assembly is now complete.
Configuring the levels
So that the control unit knows which level is which, you need to set the switches on the light control board for each level.
- For a level 1 controller, set only switch "1" on.
- For a level 2 controller, set only switch "2" on.
- For a level 3 controller, set only switch "3" on.
When you next turn on the system, the control unit will detect the control boards and display "H1 found", "H2 found" etc on the display.
The Device Control Panel will also show the current state of each light control board.
Previous: Watering tray and drains