By now you should have completed the:
- Assembly guide
- Extension assembly (if required)
- Irrigation setup
You’re now ready to turn the system on and check you have everything working OK.
- With the mains power off at the wall, plug the power supply into the back of the system.
- Turn on the mains power.
The screen on the front will show “Starting up” with the system’s unique ID.
It will spend a few seconds running a self test where lights will flash, and then the system will start cycling through various display values. Any hardware faults will show on screen.
At this stage, your H-series won’t be connected to your home WiFi network. We recommend you configure your H-series to connect to the internet via your home WiFi, so you can get alerts when the tank is low, temperatures are too low or too high, or if nutrients need topping up or diluting.
Next : Controlling your H-series