Parts required
- Nutrient feed hose (long black flexible hose)
- 8mm pipe elbow with short section of hose attached
Process
Cut the nutrient feed hose to the following length, depending on your system:
H1 : 32 cm
H2 : 74 cm
H3 : 104 cm
Plug the feed hose you have just cut, onto the elbow joint. If it's cold and the hose is hard, warm it in some hot water first.
From the top, insert the feed hose down through the front hole(s) of the watering trays. If you have more than one growing level, the feed hose runs inside feed hose covers.
Push it onto the pump outlet, which comes out of the top of the pump.
Prev : Drains and feed hose covers
Next : Levelling your system