Parts required
- 1x Rear top panel
- 1x Front top panel
Fit rear top panel
The upper rear panel will have a light control board attached to it. With this on the back left, fit the upper rear panel loosely. Do not tighten at this stage.
Fit front top panel
In the same way as you fitted the upper rear panel, fit the upper front panel, with the cross cut-outs facing to the rear. Do not tighten at this stage, we'll do that after adding the lid.
The large holes in the rear panel are for optional fans, which can be fitted with the window kit to control temperature and humidity.
Previous : Internal wiring
Next : Grow lights